Welding Positions South Africa: 1G–6G, 1F–4F, Joint Types & Skills Guide

Welding Positions South Africa: Quick Answer
Welding positions describe the orientation in which a weld is made relative to the joint and gravity. In common numbered designations, 1G, 2G, 3G and 4G are flat, horizontal, vertical and overhead groove positions on plate. 1F–4F describe corresponding fillet positions. For pipe, 5G means a fixed pipe with a horizontal axis; 6G generally means a fixed pipe inclined about 45 degrees. The actual process, material, WPS and qualification standard must also be checked.
South African learners should identify whether their objective is fillet fabrication, plate groove welding or pipe welding before choosing practical training. A 6G position label is not automatically a Red Seal qualification, all-material certification or a guarantee of coded-welding approval. This free guide explains the practical distinctions, offers a position/training route checker, and shows how to plan a realistic course or employer-skills assessment.
Welding Positions at a Glance
Position or term | Quick interpretation |
|---|---|
1G–4G plate groove | Flat, horizontal, vertical and overhead groove-weld positions. |
1F–4F fillet | Flat, horizontal, vertical and overhead fillet-weld positions. |
1G pipe | Groove weld on rotating/rolled pipe in a flat work orientation. |
2G pipe | Groove weld on fixed pipe with vertical axis; horizontal welding. |
5G pipe | Fixed pipe with horizontal axis; welder moves around the joint. |
6G pipe | Fixed inclined pipe, typically at about 45 degrees. |
Important qualification rule | Check the standard, WPS, process, material and actual test range. |
What Do G and F Mean in Welding Positions?
The letter G indicates a groove weld, while F indicates a fillet weld. On plate, numbers 1–4 indicate flat, horizontal, vertical and overhead orientation. Some of the same codes appear in pipe work but geometry and whether the pipe rotates change the actual task. Codes alone never replace the drawing or a Welding Procedure Specification (WPS).
Groove weld versus fillet weld
A groove weld is generally made between workpiece edges or within an engineered joint preparation. A fillet weld joins surfaces meeting at an angle, such as a T-joint or lap joint. Joint type, weld type and welding position are not identical concepts: a T-joint can be welded in several orientations, and two welders doing a 2G and a 2F task are not making the same type of weld.
Why does position affect the weld pool?
Gravity affects molten metal. Flat work is often easier to control, while horizontal, vertical and overhead work may increase the challenge of bead consistency, fusion and safe access. Filler-metal classification, welding process, transfer mode, workpiece geometry and the authorised procedure influence technique. Do not copy settings from a flat-position demonstration into an overhead task without appropriate qualified instruction.
Does a higher position number mean a higher certificate?
No. A 6G test can be challenging, but it qualifies only the range recognised by the actual test standard and recorded essential variables. Welding position does not automatically extend the qualification to every welding process, material group, pipe diameter, thickness or construction code.
1G, 2G, 3G and 4G: Plate Groove Welding Positions
Plate groove-weld positions are useful when planning training beyond straightforward fillet fabrication. The plate can be set flat, vertical or overhead depending on the test or actual job, and the weld's orientation changes the pool behaviour and required skills.
Plate groove code | What the designation means |
|---|---|
1G · Flat | Flat-position groove weld; plate commonly horizontal. |
2G · Horizontal | Horizontal groove weld on a vertical plate. |
3G · Vertical | Vertical groove weld; uphill/downhill governed by procedure. |
4G · Overhead | Groove weld deposited from below a horizontal plate. |
1G welding: flat groove
1G is the flat groove-welding position. It offers an accessible foundation for learning joint preparation, movement and bead consistency, but a formal 1G code test can still require stringent weld quality. Do not mistake an easy-to-explain position for a guaranteed pass.
2G welding: horizontal groove
2G on plate describes a groove running horizontally on a vertically oriented plate. The welder must manage sagging and uneven bead buildup while maintaining the specified profile and fusion. 2G plate and 2G fixed-pipe work share a code but differ in the workpiece arrangement.
3G welding: vertical groove
3G uses a vertical groove, often described as uphill or downhill welding. Those travel directions are not interchangeable: the applicable WPS, process and test rules control permitted progression. Do not assume that a test performed in one direction covers the other without checking the standard.
4G welding: overhead groove
4G is an overhead plate groove weld. Safe access, molten-pool control and suitable protective equipment are critical. A learner should not be placed in an overhead exercise simply because they have successfully made a flat bead; readiness depends on supervision and practical capability.
1F, 2F, 3F and 4F: Fillet Welding Positions
Fillet welding is common in brackets, workshop frames, supports, stiffeners and structural fabrication. The fillet-position code describes where the weld is deposited, not what welding machine you must use.
Fillet code | Typical orientation |
|---|---|
1F · Flat | Flat fillet often used in foundational fabrication practice. |
2F · Horizontal | Horizontal fillet, frequently encountered in T-joints and frames. |
3F · Vertical | Vertical fillet with specified upward or downward progression. |
4F · Overhead | Overhead fillet; access and molten-pool control important. |
1F and 2F: essential fabrication practice
Flat 1F teaches the relationship between joint fit-up, electrode or torch positioning and fillet geometry. Horizontal 2F is frequently relevant to T-joints and frames. Learners should work toward the required fillet size and sound fusion, not simply an attractive-looking bead.
3F and 4F: positional fillet development
Vertical 3F challenges molten-metal control in the direction prescribed by the procedure. Overhead 4F adds access, gravity and safety requirements. A training plan can progress to these after suitable foundational work, subject to individual readiness and actual work requirements.
Are 2F and 2G the same?
No. 2F is a horizontal fillet weld; 2G is a horizontal groove weld. They differ in joint geometry and can have different assessment requirements. A fillet test does not automatically provide blanket approval for groove welding.
Pipe Welding Positions: 1G, 2G, 5G, 6G and 6GR
When a position label refers to pipe, confirm the pipe axis and whether the pipe rotates. Pipe applications introduce geometric and access variables not present in a simple flat plate demonstration.
Pipe groove code | Geometry and key distinction |
|---|---|
1G · Rolled | Pipe rotates so welding can be done in a flat orientation. |
2G · Fixed vertical-axis | Groove welding around stationary pipe in horizontal position. |
5G · Fixed horizontal-axis | Welder travels around stationary pipe through multiple orientations. |
6G · Fixed 45° | Pipe held stationary at about 45°, requiring multiposition work. |
6GR · Restricted | A separate restricted arrangement under specific testing rules. |
1G pipe: rotating workpiece
In a common 1G rolled-pipe arrangement, the workpiece rotates to facilitate a flat-position groove weld. That differs from fixed-pipe work, where the welder moves around the circumference while the pipe stays stationary.
2G pipe: fixed, vertical-axis workpiece
A fixed pipe with its axis vertical uses 2G in typical groove-position descriptions. The weld is made around the pipe in a horizontal orientation. Clarify the diagram and test specification before assuming that every reference to 2G concerns plate.
5G pipe: fixed horizontal axis
In 5G, the pipe remains fixed horizontally while the welder proceeds around the joint through changing orientations. The exact direction of welding may be designated separately under ISO terminology. This is not the same as rotating a pipe through a flat position.
6G pipe: fixed 45-degree incline
For typical 6G work the pipe is fixed at about 45 degrees. It combines challenging position changes and is widely used as a pipe-welder skills-test geometry. The test's actual acceptance and qualification ranges depend on the code, process, material, dimensions and any other essential variables.
What is 6GR?
6GR is a restricted variation of the inclined fixed-pipe test used in certain qualification arrangements. It is not interchangeable with ordinary 6G, nor required for every learner or every welding project.
ISO 6947, ASME and AWS: Why Welding Codes Look Different
You may see PA, PB, PC, PD, PE, PF, PG, PH or H-L045 in ISO terminology alongside numbered G/F designations. ISO 6947:2019 defines positions for testing and production and includes comparisons with US designation systems. The choice of construction and qualification standard comes from the actual project requirement, not the learner's preference.
Typical label comparison | Useful meaning; always verify the applicable code |
|---|---|
PA / 1G | Flat groove on plate or rotated pipe where relevant. |
PA / 1F | Flat fillet. |
PB / 2F | Horizontal-vertical fillet. |
PC / 2G | Horizontal plate groove, or defined fixed-pipe geometry. |
PF / 3G up | Plate groove, vertical upwards. |
PG / 3G down | Plate groove, vertical downwards. |
PE / 4G | Overhead plate groove. |
PD / 4F | Overhead fillet. |
PH / 5G up | Fixed horizontal-axis pipe, upward progression. |
H-L045 / 6G | Fixed inclined pipe around 45°, upward progression. |
Plate and pipe conversions are not always one-to-one
An ISO PF example often refers to vertical-up plate groove welding, while PH is associated with upward welding of a fixed horizontal-axis pipe. H-L045 refers to an inclined pipe orientation. This is an orientation reference, not a complete qualified-range table.
Which standard should a welder follow?
The responsible engineering and quality requirements determine whether ISO 9606, ASME Section IX, AWS or another applicable standard is used for testing. A training provider should confirm what it actually offers, including the appropriate test record and authorised assessment arrangement.
Five Basic Welding Joint Types: Why Geometry
Matters
A joint type is the relationship between metal pieces. It is separate from the weld type, welding position and method of testing. These five joint categories are common in fabrication learning.
Common joint type | What the geometry usually means |
|---|---|
Butt joint | Two edges meet, often with a groove weld and specified preparation. |
T-joint | One member meets another roughly at right angles; often fillet-welded. |
Lap joint | Workpieces overlap, with fillets often along accessible edges. |
Corner joint | Members meet at a corner; weld type is specified separately. |
Edge joint | Adjacent edges joined; configuration depends on engineering design. |
The drawing and WPS take priority
A butt joint may be square or groove-prepared. A lap or T-joint may call for one or several fillets. The procedure controls joint preparation and welding requirements. For the specialised drawing interpretation, refer to Welding Symbols South Africa and How to Read Fabrication Drawings for Welding. Those existing articles own symbol and drawing analysis; this page owns position selection.
Can MIG, TIG, Stick and Flux-Core Be Used in Every Welding Position?
The welding process alone does not answer that question. MIG/GMAW, TIG/GTAW, stick/SMAW and FCAW each have process variants, consumables, limitations and approved procedure requirements. Some applications suit all-position practice; others have restrictions tied to metal-transfer mode, filler classification or joint and material details.
Welding process | Position considerations |
|---|---|
SMAW / Stick | Electrode classification, approved procedure and work orientation. |
GMAW / MIG-MAG | Transfer mode and consumable positional limits; WPS required. |
GTAW / TIG | Procedure, material, root control and access; qualification not implied. |
FCAW / Flux core | Actual wire type, shielding mode and supported positions. |
MIG welding position choice
MIG training must match the actual transfer mode and application. A learner working on workshop frames may have different needs from a welder preparing a coded pipe test. Do not equate selecting MIG with having a qualified all-position process.
TIG welding position choice
TIG is used where careful control is needed, including many pipe and material-specific applications. Training must account for the real process and joint. A beginner TIG course is not automatically a 6G qualification or a stainless-steel pipe certification.
Stick welding position choice
SMAW/stick often features in fabrication and site work. Electrode classification and approved parameters matter; all electrodes are not suitable for all positions. Consumable guidance should come from the manufacturer and the applicable WPS.
How to Build a Practical Welding Position Training Plan
A useful learning plan connects a real workpiece and job requirement to an appropriate process, course and evidence of competence. It should be individually scoped, not sold as a universal number of training days.
Step 1 — Identify the required workpiece and joint
Is the work a frame fillet, a plate groove or fixed pipe? Can it be positioned safely? Select the correct geometry before picking a position code. Consider both the worksite and training workshop arrangements.
Step 2 — Confirm the drawing, WPS and materials
Record the drawing or job reference, material, joint, process, expected orientation, WPS and acceptance criteria. If a requirement is unclear, resolve it with the responsible qualified person; guessing is not a valid specification.
Step 3 — Establish the starting skill level
Document practical experience, prior training and observed capability. A new learner may start with controlled flat fillets; an experienced welder may need targeted 3G, 4G or fixed-pipe practice. Do not assume identical starting points for every worker.
Step 4 — Plan the position sequence and supervision
Group position practice into a feasible route, using appropriate workplace controls, equipment and oversight. An illustrative path from fillet to plate and pipe is common, but the exact progression depends on provider curriculum and learner goals.
Step 5 — Capture practice and quality evidence
Record dates, joint geometry, position, process, material, supervisor or instructor, observed imperfections and next actions. A completed practice log is evidence of training activity, not a certificate unless the applicable assessment rules establish it as such.
Step 6 — Determine whether a formal test is required
Practical training, employer competency review, project-specific welder qualification and a formal artisan trade test are different outcomes. Confirm which one the individual or client actually needs before booking.
Skill objective | Recommended scope discussion |
|---|---|
Introductory fabrication | Safe workshop basics, simple joints and appropriate flat/horizontal fillets. |
Plate progression | Practical 1G/2G and relevant 3G/4G groove-position development. |
Fixed-pipe preparation | Pipe geometry, process, material, 5G/6G requirements and readiness. |
Formal welder qualification | Test standard, procedure, actual qualified range and documentation. |
Employer workforce | Job-to-skill matrix for processes, positions and supporting evidence. |
Common Welding Position Problems and Quality Checks
Gravity, access, unsuitable consumables, wrong fit-up or deviation from an approved procedure can lead to weld imperfections. Visual checking may identify undercut, poor profile, surface porosity, overlap or other indications. Some weld-quality concerns require other inspection methods under the project specification.
Pre-training or assessment check | What the employer or learner should record |
|---|---|
Joint and position | Actual fillet, plate or pipe geometry and position code. |
Process and materials | SMAW/GMAW/GTAW/FCAW, base material and relevant filler. |
Procedure and inspection | WPS reference, acceptance criteria and verification stage. |
Safety setup | PPE, ventilation, safe equipment, access and supervision. |
Practice record | Date, process, position, workpiece, review and next steps. |
Formal test evidence | Applicable standard, result, range, date and authorised sign-off. |
Vertical and overhead warning signs
Poor access or a weld pool that is difficult to control can affect fusion and profile. Seek qualified practical supervision and confirm permitted procedure settings; generic online parameters are not a substitute for task-specific guidance.
A visually neat weld can still fail
A bead photograph is not evidence of successful procedure qualification. The relevant acceptance criteria, inspector or authorised person determines whether the work meets the specified standard.
6G, Coded Welding and Red Seal: Not the Same Qualification
A welding position is the orientation of the task. A coded welder is assessed against an identified welding code and qualified range. Red Seal concerns a formal artisan/trade qualification pathway. They are not equivalent certificates, and one cannot be assumed from another.
Does a 6G test cover all processes and positions?
Not automatically. Depending on the governing standard, a 6G test can qualify particular positional ranges, but essential variables such as process, material, thickness and pipe diameter still matter. Always consult the actual signed test record.
Is SAQA 94100 a 6G course?
No. South Africa's Occupational Certificate: Welder (SAQA ID 94100) covers much broader knowledge, fillet, plate and pipe practical skills, and a formal assessment pathway. Its official SAQA record also shows registration/end-date and later transition milestones; providers should verify current QCTO/SAQA arrangements rather than presenting every short course as this occupational qualification.
For the detailed distinctions between code testing and welder career pathways, consult Coded Welding South Africa.
Employer Welding Skills Matrices: Match Employees to Actual Work
A workshop manager can use a position matrix to identify training gaps before allocating work. It should list actual process, joint geometry, required position, relevant WPS, evidence of competency and any formal testing conditions. A tick beside '6G' alone is not sufficient.
Separate required from demonstrated skills
For each person, keep the required job task and demonstrated current capability as different records. Add date, training evidence, signed assessment where applicable, and any qualification or continuity limitations. Avoid assuming that years of experience equal a current coded test for a new process.
Plan group training around genuine gaps
One employer may need MIG fillet skills, another vertical plate groove preparation, another fixed-pipe test readiness. A properly scoped team programme can address the real needs but cannot guarantee that every trainee reaches a coded standard during a fixed number of days.
Choosing Welding Training in Cape Town: What to Ask First
Before enrolling, confirm the stated process, materials, joint and position range, entry assumptions, practical hours and whether any formal assessment is included. A provider's general course title does not establish that a 6G test or Red Seal pathway is included.
Beginner aiming for fabrication work
Consider foundational safety, setup, simple fillet welds, and suitable MIG or stick skills. The starting process should reflect the likely employment or workshop tasks rather than marketing claims about which is universally best.
Welder improving plate positions
Ask about 1G, 2G, 3G and 4G practice in the actual process and material. Understand the difference between practice, recorded internal competency and formal test arrangements.
Experienced welder moving into pipe or coded work
Confirm 5G/6G geometry, pipe process, material, joint size, governing code and whether test preparation or formal assessment is the appropriate next step. Actual scope should be agreed before payment.
Employer booking for multiple welders
Provide staff numbers, prior experience, process, tasks, materials and the required position profile. Company or on-site training should be quoted against that scope, not as a generic one-size-fits-all promise.
Frequently Asked Questions About Welding Positions in South Africa
What are the four basic welding positions?
Flat, horizontal, vertical and overhead, usually shown as 1 through 4 in common plate groove or fillet designations.
What is 1G welding?
A flat groove-weld position. It can refer to flat plate work or rotating pipe depending on the geometry specified.
What is 2G welding?
A horizontal groove position; check whether the job uses a vertical plate or fixed pipe.
What is 3G welding?
A vertical plate groove weld. Progression upward or downward is governed by the applicable procedure and test rules.
What is 4G welding?
An overhead plate groove position requiring appropriate technique, access and protection.
What is 5G pipe welding?
Groove welding around a fixed pipe with a horizontal axis, so the welder works through changing orientations.
What is 6G pipe welding?
A fixed pipe with its axis inclined about 45 degrees, used in some demanding practical tests.
What is 6GR welding?
A restricted variant of the inclined fixed-pipe test, used only in specified qualification arrangements.
What does F mean in 1F or 3F?
F identifies a fillet-weld position; the number identifies its common orientation category.
What is the difference between 2F and 2G?
2F is a horizontal fillet weld, whereas 2G is a horizontal groove weld.
Is 6G more difficult than 1G?
Often, fixed 6G pipe geometry adds access and position-control challenges compared with flat 1G, but test difficulty also depends on the process and required acceptance criteria.
Can MIG, TIG and stick be used in any position?
Some variants and consumables support multiple positions, but you must verify the actual approved process, transfer mode, consumable and WPS.
Does passing 6G make me a coded welder for every job?
No. The actual code test and its recorded qualified ranges determine what work the person may undertake.
Is 6G the same as a Red Seal welding qualification?
No. A welding-position test and a formal artisan/trade qualification are different pathways.
Which welding course should I choose in Cape Town?
Select practical training based on the joint, process, position, material, experience and intended job. SSA's free position checker can suggest an appropriate enquiry route, not certify capability.
Authoritative Sources & Regulatory References
These official qualification and standards-publisher resources, together with established welding technical references, support the distinctions in this guide. The full ISO standard is copyrighted; this page does not reproduce its complete diagrams or code provisions.
Technical or authoritative authority | Relevant official record or practical reference |
|---|---|
Southern African Institute of Welding | |
SAIW – International Welder | |
ISO standards publisher | |
South African Qualifications Authority | |
MillerWelds technical library | |
SAIW practical welding centre |
Read More: Three Related Welding Guides
Relevant SSA article | What to read next |
|---|---|
Welding Symbols South Africa | |
How to Read Fabrication Drawings for Welding | |
Coded Welding South Africa |
Final Word: Understand the Position, Then Choose the Training
Knowing welding positions can help learners plan realistic practical development and employers identify qualified-position gaps. Match the true joint, process, material, position and test standard before selecting training or assessment.
Swift Skills Academy can discuss welding training in Cape Town, but a position label alone cannot guarantee a coded qualification, Red Seal certificate, site acceptance or employment.




